Universal Forks for Crane

handle wallboards and other lying building materials up to a size of 1250 mm / 49 in height and 460 mm / 18 in depth. The tine spread can be adjusted to the sheets that have to be handled. The boards can be lifted and folded into a vertical position and are clamped between tines and frame, preventing them from sliding during handling. The load itself is protected from damage by semi-tapered forged tines with rollers and pads. 

A special version with second suspension point on the main beam enables the unloading of lying boards through narrow openings in the wall.

For the US, the forks are also available as LS low storage version, especially designed for »over-the-cab-storage« where limited space requires a very narrow fork frame and overall width. 

For the US, the forks are also available as LS low storage version, especially designed for »over-the-cab-storage« where limited space requires a very narrow fork frame and overall width. 

A wide range of accessories is available for the universal forks. 

KM 461 available with 1500 kg / 3300 lbs load capacity as complete package: universal fork, rotator, short hoses, upper suspension, pressure relief and counterbalance valves.
Single universal forks available with 800 up to 2500 kg / 1760 up to 5500 lbs load capacity and different tine spreads. 

US-Versions:

KM 461 available with 6000 lbs load capacity, different flat lift and throat heights and different tine spreads as complete package: universal fork, US-rotator, short hoses, upper suspension and counterbalance valve.

KM 461LS low storage-version available with 6000 lbs load capacity, flat lift height 54 in and throat height 22 in with tine spread 25 – 63 in as complete package: low storage universal fork, US-rotator, short hoses, upper suspension and counterbalance valve.