Static Pulverisers for Excavator

the KINSHOFER static pulverisers are available in three different sizes and two versions each: standard or Extreme version (up to 65t / 143000 lbs only Extreme version available). All can break up reinforced concrete structures and separate steel.

Teeth and scrapers are exchangeable on site for all versions, as well as the ground tooth plate and the shrouds. The bearing points have been engineered for an optimum load handling and a reduced wear. 

The standard version features an integrated dual action speed valve, while the Extreme-version is featuring the patented DemaPower cylinder, providing up to 20% more power and reducing the cycle times to under 5 seconds!

Now also available including 360° rotation for all versions and sizes: DSP-R!

Static Pulverisers Standard and Standard Rotating Version:

DSP-30 / DSP-30-R for excavators with 20 to 35t / 44000 to 77000 lbs and cycle times of 2.5 seconds (open) and 2.5 seconds (close) at a closing force of 735 kN / 161700 lbf and a wide jaw opening for large parts of 885 mm / 34.84 in. 

DSP-45 / DSP-45-R for excavators with 30 to 50t / 66000 to 110000 lbs and cycle times of 2.6 seconds (open) and 2.9 seconds (close) at a closing force of 980 kN / 215600 lbf and a wide jaw opening for large parts of 1015 mm / 39.96 in.  


Static Pulverisers Extreme and Extreme Rotating Version:

DSP-30-Extreme / DSP-30-R-Extreme for excavators with 20 to 35t / 44000 to 77000 lbs and cycle times of 2.0 seconds (open) and 2.3 seconds (close) at a closing force of 880 kN / 193600 lbf and a wide jaw opening for large parts of 885 mm / 34.84 in.  

DSP-45-Extreme / DSP-45-R-Extreme for excavators with 30 to 50t / 66000 to 110000 lbs and cycle times of 2.0 seconds (open) and 2.9 seconds (close) at a closing force of 1175 kN / 258500 lbf and a wide jaw opening for large parts of 1015 mm / 39.96 in.  

DSP-60-Extreme / DSP-60-R-Extreme for excavators with 42 to 65t / 92400 to 143000 lbs and cycle times of 2.0 seconds (open) and 2.8 seconds (close) at a closing force of 1370 kN / 301400 lbf and a wide jaw opening for large parts of 1185 mm / 46.65 in.