Orange Peel Grabs for Excavator
Characteristics of the Orange Peel Grabs:
… of many year of experience, research, development and testing in collaboration with our subsidiaries and clients.
Throughout the years, the orange peel grabs have been further developed and improved, until today’s version had finally been ready – for many the best orange peel grab range on the market!
The P-series orange peel grabs are available with three, four or five tines, depending on type and version, and in four different tine profiles for a perfect fit to your task:
• Fully closing tines (F)
• Half closing tines (H)
• Wide style of pointed tines (W)
• Pointed Tines (T)
Oil distribution and hydraulic hoses are protected in the center section. The hydraulic cylinders are fitted with replaceable piston rod protections and are hydraulically cushioned. Wide opening ranges guarantee a good penetration and release behavior.
The orange peel grabs are available with rotator or integrated rotation (heavy duty) with sturdy slewing, depending on the type.
The heavy duty version features solid end stops, accurate fittings, reinforced bolts and large bearing surfaces amongst others.
There is also a rigid mount version (P25VR HD) available with three tines for excavators with up to 25t operating weight, that has been developed especially for heavy duty task.
P22V with four or five tines for excavators with 16 to 22t / 35200 to 48400 lbs.
P25VR HD with three tines for excavators with 18 to 25t / 39600 to 55000 lbs.
P30VHD with four or five tines for excavators with 20 to 30t / 44000 to 66000 lbs.
P40VHD with three, four or five tines for excavators with 26 to 40t / 57200 to 88000 lbs.
P51VHD with four or five tines for excavators with 36 to 50t / 79200 to 110000 lbs.
P80VHD with four or five tines for excavators with 50 to 80t / 110000 to 176000 lbs.
P120VHD with four or five tines for excavators with 80 to 120t / 176000 to 264000 lbs.
The orange peel grabs are available for excavators with operating weights from 16t to 120t.