Earth Drills and Augers for Crane

… for loader cranes up to 18.0 t/m from the Kinshofer Group member Auger Torque are an economical and customized solution for the drilling of holes for e.g. fence posts, poles, foundations or plant holes for bushes and trees. Well drilling or screw pile installations are also not a problem with these reliable earth drills. 

The non-dislodgement shaft (NDS) provides for more safety and less downtimes, as the shaft cannot dislodge from the mechanism. The hydraulic oil used inside of the unit is dyed blue, serving as an indicator for service times and facilitating the detection of leakages. The robust head plates with the strong forged ears cope with the heavy strain of daily use without showing any signs of fatigue.

The greasing points are easily accessible. 

… matched to the corresponding earth drills and every application. A constant spiral configuration and a shallow pitch flight guarantee extreme efficiency and productivity. Thanks to the easily exchangeable wear parts like pilots and teeth, the auger can be adjusted to different ground conditions. Due to the patented Shock Lock System, the teeth have a longer lifespan, shocks are absorbed and tooth loss prevented. 

Additional adjustment comes from auger extensions in different length options –  available as regular or telescopic versions. 

Ideal for the safe transport at the carrier machine: the suitable rope wind hitch for every earth drill. 

With our patented Shock Lock tooth locking system, tooth loss is now a thing of the past. Using the Shock Lock pin and rubber in the unique Shock Lock tooth holders ensures your auger teeth are safely locked in place and protected against shock fractures. 

The exchange of worn teeth is easy and fast. Simply knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fitting spare teeth due to losing them again.

2300-10 earth drill for loader cranes up to 9 t/m; 7 - 46 rotations per minute with a torque range of 710 to 2,295 ft.lbs at 1,450 to 3,750 psi.

4000-14 earth drill for loader cranes up to 15 t/m; 11 - 38 rotations per minute with a torque range of 1,240 to 4,040 ft.lbs at 1,450 to 3,750 psi.

5000-14 earth drill for loader cranes from 9 to 18 t/m; 9 - 30 rotations per minute with a torque range of 1,550 to 5,030 fr.lbs at 1,450 to 3,750 psi.

S4 augers for earth drill 2300-10 available with many different diameters and suitable extensions.

S5 augers for earth drills 4000-14 and 5000-14 available with many different diameters and suitable standard and telescopic extensions.