HPXdrive for Crane | Technologies

Image

Functional exchange, depending on demands!

With increasing costs and environmental awareness, working efficiently is essential. When compared with a conventional cylinder-driven grab, the HPXdrive stands out thanks to its extended lifetime.
Not only maintenance downtimes are reduced but also operational expenses. The integrated shell exchange system and the different available shell options provide high flexibility on one hand, and lower the cost of ownership for additional attachments on the other hand.
Image
The HPXdrive Standard (SD) guarantees a secure working in daily tasks. Integrated pressure relief valves keep the operation independent from the carrier‘s operating pressure. The drive unit HPXdrive can be equipped with a standard flange rotator as well as with a shaft rotator. When used in combination with a shaft rotator, there are several options to connect the rotator with the drive unit, e.g. with our fully hydraulic quick change device KM 506HD.
CLAMSHELL BUCKET WITH HPXdrive
CLAMSHELL BUCKET WITH HPXdrive
SMALL VOLUME CLAMSHELL BUCKET
WITH HPXdrive
SMALL VOLUME CLAMSHELL BUCKET WITH HPXdrive
UNIVERSAL GRAPPLE WITH OPEN SHELLS
AND HPXdrive
UNIVERSAL GRAPPLE WITH OPEN SHELLS AND HPXdrive
ROCK GRAPPLE WITH HPXdrive
ROCK GRAPPLE WITH HPXdrive
TIMBER GRAPPLE WITH HPXdrive
TIMBER GRAPPLE WITH HPXdrive
HAY & FORESTRY GRAPPLE WITH HPXdrive
HAY & FORESTRY GRAPPLE WITH HPXdrive

ALL SD-SHELLS ARE EXCHANGEABLE:

Type

  HPXdrive   Opening   Closing force
KM 604HPX   SD-module   1390 mm   19 kN
KM 626HPX   SD-module   890 mm   31 kN
KM 604U HPX   SD-module   1590 mm   17 kN
KM 613HPX   SD-module   1200 mm   18 kN
KM 632HPX   SD-module   1220 mm   18 kN
KM 641HPX   SD-module   1190 & 1630 mm   14 & 18 kN
Information about the closing force refers to the max. working pressure of 250 bar.

 

CUSTOMER BENEFITS:

FLEXIBLE OPERATION Fast and easy response to requirements, to be more competitive.
LOW MAINTENANCE The HPXdrive has no greasing point that need to be lubricated on a daily basis. Maintenance costs and time savings.
LESS WEARThe compact and extremely robust design, without hydraulic cylinders or short hoses, lowers risk of damages.
HIGHER EFFICIENCY More power thanks to the constant closing force during the entire gripping process. Tasks are finished faster and wear is kept to a minimum.
COMPACT DESIGN The HPXdrive has a compact and very robust design, no greasing points and, when mounted with a KINSHOFER rotator, short connecting hoses are no longer needed (internal oil feedthrough).
Image
Image
The HPXdrive Heavy Duty (HD) is a robust drive unit for heavy duty tasks. The wear-resistant, hydrostatic bearings provide for a higher level of efficiency, resulting in higher closing forces. There are also versions for Z-cranes available with the HPXdrive Heavy Duty. The HD drive can also be equipped with either a standard flange or a shaft rotator.
CLAMSHELL BUCKET WITH HPXdrive
CLAMSHELL BUCKET WITH HPXdrive
CLAMSHELL BUCKET WITH FLAP AND HPXdrive FOR Z-CRANES
CLAMSHELL BUCKET WITH FLAP AND HPXdrive FOR Z-CRANES
UNIVERSAL GRAPPLE WITH OPEN SHELLS AND HPXdrive
UNIVERSAL GRAPPLE WITH OPEN SHELLS AND HPXdrive
UNIVERSAL GRAPPLE WITH FLAP, OPEN SHELLS AND HPXdrive FOR Z-CRANES
UNIVERSAL GRAPPLE WITH FLAP, OPEN SHELLS AND HPXdrive FOR Z-CRANES
ROCK GRAPPLE WITH HPXdrive
ROCK GRAPPLE WITH HPXdrive
TIMBER GRAPPLE WITH HPXdrive
TIMBER GRAPPLE WITH HPXdrive
HAY & FORESTRY GRAPPLE WITH HPXdrive
HAY & FORESTRY GRAPPLE WITH HPXdrive

ALL HD-SHELLS ARE EXCHANGEABLE:

Types

  HPXdrive   Opening   Closing force
KM 605HPX   HD-module   1420 mm   30 kN
KM 605HPX-Z   HD-module   1420 mm   34 kN
KM 605U HPX   HD-module   1545 mm   28 kN
KM 605U HPX-Z   HD-module   1545 mm   28 kN
KM 613HPX-HD   HD-module   1710 mm   22 kN
KM 632HPX-HD   HD-module   1290 mm   31 kN
KM 641HPX-HD   HD-module   1720 mm   23 kN
Information about the closing force refers to the max. working pressure of 320 bar.

 

CUSTOMER BENEFITS:

FLEXIBLE OPERATION Fast and easy response to requirements, to be more competitive.
LOW MAINTENANCE The HPXdrive has no greasing point that need to be lubricated on a daily basis. Maintenance costs and time savings.
LESS WEARThe compact and extremely robust design, without hydraulic cylinders or short hoses, lowers risk of damages.
HIGHER EFFICIENCY More power thanks to the constant closing force during the entire gripping process. Tasks are finished faster and wear is kept to a minimum.
COMPACT DESIGN The HPXdrive has a compact and very robust design, no greasing points and, when mounted with a KINSHOFER rotator, short connecting hoses are no longer needed (internal oil feedthrough).
Image

Exchange of shells with HPXdrive:

Shells mounted.
Shells mounted.
Loosen 4 retaining bolts on one side.
Loosen 4 retaining bolts on one side.
Remove loose bolts and clamping parts and
place exchange aid.
Remove loose bolts and clamping parts and place exchange aid.
Loosen bolts on other side, Remove bolts and clamping
parts and place exchange aid.
Loosen bolts on other side, Remove bolts and clamping parts and place exchange aid.
HPXdrive is loose.
HPXdrive is loose.
Lift HPXdrive and place it above the other
set of shells.
Lift HPXdrive and place it above the other set of shells.
Remove exchange aids first and then bolt on
clamping parts on one side. Repeat on the
other side.
Remove exchange aids first and then bolt on clamping parts on one side. Repeat on the other side.
Shells are mounted.
Shells are mounted.

Thanks to the shell exchange system you lower your fleet investment costs.

Fast and easy, just choose and switch the suitable shell option according to the task. The reliable shell exchange system features an easy loosening of the shells in case of exchange and a safe and steady holding of loads during every task. Setup times are reduced to a minimum. Both your competitiveness and working process flexibility are optimized.

CLOSING FORCE PROCESS (illustration)

Image
Compared to conventional cylinder grabs, HPXdrive closing force is high and constant during the entire open/close cycle. Movement of the arms is generated by two hollow shafts, which run opposed, and have a helix thread, hydraulically driven by a single piston. The resulting closing force remains constant wherever the position of the shells.

Toplinks

KINSHOFER GmbH
Raiffeisenstrasse 12
83607 Holzkirchen
Tel.: +49 (0)8021 8899 0
Fax: +49 (0)8021 8899 37
info@kinshofer.com

CONTACT

 

 

 

Give us a call:

Kinshofer UK: +44 (0) 161 406 7046

General: +49 (0) 8021 8899 0
Office hours: from 08.00 until 17.00


Request a callback.


You got some questions?
Please use our Contact form.


Kinshofer UK: sales-uk@kinshofer.com 

General: info@kinshofer.com