Toplinks
KINSHOFER GmbH
Raiffeisenstrasse 12
83607 Holzkirchen
Tel.: +49 (0)8021 8899 0
Fax: +49 (0)8021 8899 37
The drum cutters with robust spur gearing are driven by high torque motors. In addition, they are equipped with a gear reduction to increase the cutting force. The optimal selection of drum and chisel guarantees high performance for loosening of material and reduces wear.
The best suited components for your task will provide optimum penetration into the rock at low vibration and noise levels.
Underwater operation in up to 25m water depth is no problem thanks to the heavy duty sealing system!
Some facts on the KDC drum cutters:
Also great in combination with our NOX Tiltrotators!
ATTENTION: In order to be able to claim warranty, this report on installation and entry into service must be sent to the manufacturer within 30 days after entry into service, filled-in completely and correctly, by mail or email to This email address is being protected from spambots. You need JavaScript enabled to view it.
KDC04 available for excavators with 2 t to 4 t / 4400 lbs to 8800 lbs.
KDC06 available for excavators with 4 t to 6 t / 8800 lbs to 13200 lbs.
KDC08 available for excavators with 5 t to 8 t / 11000 lbs to 17600 lbs.
KDC15 available for excavators with 9 t to 14 t / 19800 lbs to 30800 lbs.
KDC20 available for excavators with 12 t to 20 t / 26400 lbs to 44000 lbs.
KDC30 available for excavators with 18 t to 30 t / 39600 lbs to 66000 lbs.
KDC35 available for excavators with 25 t to 35 t / 55000 lbs to 77000 lbs.
KDC45 available for excavators with 30 t to 45 t / 66000 lbs to 99000 lbs.
KDC60 available for excavators with 40 t to 60 t / 88000 lbs to 132000 lbs.
All drum cutters are equipped with either excavating, demolition or profiling drums.
KDC Drum Cutter with NOX Tiltrotator