Earth Drills and Augers for Excavator

Earth Drills and Augers
The robust earth drills for excavators up to 45t / 9900000 lbs, skidsteers and telehandlers from the KINSHOFER Group member Auger Torque are an economical and customized solution for the drilling of holes for e.g. fence posts, poles, foundations or plant holes for bushes and trees. Well drilling or screw pile installations are also not a problem with these reliable earth drills.


The non-dislodgement shaft (NDS) provides for more safety and less downtimes, as the shaft cannot dislodge from the mechanism. The hydraulic oil used inside of the unit is dyed blue, serving as an indicator for service times and facilitating the detection of leakages. The robust head plates with the strong forged ears cope with the heavy strain of daily use without showing any signs of fatigue. The greasing points are easily accessible.

The augers are perfectly matched to the corresponding earth drills and every application. A constant spiral configuration and a shallow pitch flight guarantee extreme efficiency and productivity. Thanks to the easily exchangeable wear parts like pilots and teeth, the auger can be adjusted to different ground conditions. Due to the patented Shock Lock System, the teeth have a longer lifespan, shocks are absorbed and tooth loss prevented. 

Additional adjustment comes from auger extensions in different length options –  available as regular or telescopic versions.

Ideal for the safe transport at the carrier machine: the suitable rope wind hitch for every earth drill.

Torque meter: the correct torque is extremely important for screw pile installations to guarantee the structure's safety. The detection of the torque data in real time for this critical operation is an easy task with the new Auger Torque torque meter with an accuracy of up to 99.7%.

Alignment monitor: for screw pile installations, the correct alignment of the auger is crucial. Thanks to the sensor mounted to the earth drill and the display in the driver's cabin, the operator is able to control the drilling and immediately correct each deviation. The sensor is water-resistant and thus suitable for every weather condition.

Stump Planers and Log Splitter

Stump Planer:

  • Different hub options suitable to the respective earth drill available.
  • The unique pilot is drilling into the tree stump and pulling down the planer unerringly. 
  • Due to the arrangement of the blades, a new cut is done at each turn.
  • The tree stump is planed off to small and easy to clean splints.


Log Splitter

  • Pilot and splitter with self-guiding thread.
  • Pilot made of hardened steel.

 

X1500 for excavators with 1 to 2t / 2200 to 4400 lbs operating weight.
X2000 for excavators with 1 to 2.5t / 2200 to 5500 lbs operating weight.
X2500 for excavators with 1,5 to 3t / 3300 to 6600 lbs operating weight.
3000MAX for excavators with 2 to 4t / 4400 to 8800 lbs operating weight and skidsteers.
3500MAX for excavators with 2.5 to 4.5t / 5500 to 9900 lbs operating weight.
4500MAX for excavators with 3 to 5t / 6600 to 11000 lbs operating weight and skidsteers.
5500MAX for skidsteers and telehandlers.
7000MAX for excavators with 5 to 7t / 11000 to 15400 lbs operating weight and skidsteers and telehandlers.
8000MAX for excavators with 6 to 8t / 13200 to 17600 lbs operating weight and skidsteers and telehandlers.
15000MAX for excavators with 10 to 15t / 22000 to 33000 lbs operating weight.
20000MAX for excavators with 13 to 20t / 28600 to 44000 lbs operating weight.
25000MAX for excavators with 15 to 22t / 33000 to 48400 lbs operating weight.
35000MAX for excavators with 20 to 45t / 44000 to 99000 lbs operating weight.
42000MAX for excavators with 20 to 45t / 44000 to 99000 lbs operating weight.
65000MAX for excavators with 21 to 45t / 46200 to 99000 lbs operating weight.

 


Augers
S4/S5/S6
augers available with different diameters, pilots and teeth. 
PA augers for heavy duty tasks available with different diameters, pilots and teeth.
Tapered augers for the drilling in slopes are available optionally on request.


Stump Planers
SP250
for excavators with 1 to 5t / 2200 to 11000 lbs operating weight, diameter 250 mm / 9.84 in.
SP350 for excavators with 4.5 to 8t / 9900 to 17600 lbs operating weight and high flow skidsteers, diameter 350 mm / 13.78 in.


Lof Splitter
for excavators with 1 to 5t / 2200 to 11000 lbs operating weight.

SP450
SP450
SP250
SP350
Earth Drill Packing
Mixer Bowl
Loader Adapter with Mixer Bowl
Torque Meter
Alignment Monitor
Shock Lock-System
HYK
HYD
BOR (4)
BOR (3)
BOR (2)
BOR (1)
BAD+HYK+BOR
Log Planer
Alignment Monitor for Auger
Side Shift Frame for Skidsteer
2-Way Swing Frame Mini Loader
2-Pin Suspension
Cradle Hitch
3000MAX
1200
30 000
10 000
Tooth Options
Telescopic Extensions-Teleskop-Verlaengerungen
S4 / S5 Extensions
S5 Auger Examples
S4 Auger Examples
Pilot Options
Previous Next Play Pause

Earth Drills and Augers
Earth Drill Accessories
Earth Drill Mounting Options
Stump Planer and Log Splitter for Earth Drills
CONTACT

 

 

 

Give us a call:

UK – Kinshofer UK: +44 (0) 161 406 7046

USA and Canada – Kinshofer USA & NA (Toll Free): 1 (800) 268 9525

USA Solesbee's (Toll Free): 1 (800) 419 8090

General: +49 (0) 8021 8899 0
Office hours: from 08.00 until 17.00


Request a callback.


You got some questions?
Please use our Contact form.


UK – Kinshofer UK: sales-uk@kinshofer.com 

Canada – Kinshofer NA: sales-northamerica@kinshofer.com 

USA – Kinshofer USA: sales-northamerica@kinshofer.com 

USA – Solesbee's: sales@solesbees.com 

General: info@kinshofer.com