Toll Free North America 1 (800) 268 9525     For UK +44 (0) 161 406 7046    

Sleeper Layers


The RUS05 sleeper layer is a highly dedicated tool to grab and position sleepers at a specified range according to the requirements and easily adjusted. The sleepers are clamped together at their center at the same time by hydraulic grippers and then laid into the ballast bed. This saves time compared to placing the sleepers individually. Nearly all types of waisted sleepers can be clamped securely, even at pressure drops thanks to a special integrated holding valve.

The RUS2 05 sleeper layer is also dedicated to the clamping and positioning of nearly all types of waisted sleepers, but this tool is clamping the sleepers at the ends instead of the center.


Both versions are ideally used in combination with a NOX-Tiltrotator to be able to fully exploit the flexibility of the tool.

RUS05 available for excavators with 12 to 24t / 26500 to 52800 lbs operating weight with a gripping range of 150 to 265mm / 5.91 to 10.43 in for sleepers with a max. weight of 350 kg / 770 lbs per sleeper, a total length of 2820 mm / 111.02 in to clamp 5 sleepers. 

RUS2 05 available for excavators with 12 to 24t / 26500 to 52800 lbs operating weight with a gripping range of 2400 to 2800 mm / 94.49 to 110.23 in for sleepers with a max. weight of 350 kg / 770 lbs per sleeper, clamping 5 sleepers.

RUS05
RUS05
RUS2-05 (1)
RUS2-05 (1)
RUS2-05 (2)
RUS2-05 (2)
RUS2-05 (3)
RUS2-05 (3)
RUS2-05 (4)
RUS2-05 (4)
RUS2-05 (5)
RUS2-05 (5)
RUS2-05
RUS2-05
RUS05 (1)
RUS05 (1)
RUS05 (2)
RUS05 (2)
Previous Next Play Pause

  Sleeper Layers
RUS05
RUS2 05
Ask about this product