Hydraulic Breakers KSB/KFX

The KSB breaker series, for excavators from 0.5-12t, benefits from a distinctive 'mono bloc' design, manufactured in a single piece and without any tie rods – a feature that makes the structure extremely durable and resistant to leverage during operation. The new KSB-series has a has a wide calibration range of the required oil flow for an easier setup. The tapered shape also ensures excellent visibility during operation, allowing the operator to work close to walls and other structures.

  • More power, less vibration and maintenance: Inertial nitrogen energy recovery gives more power and less vibration thanks to nitrogen chamber (no internal diaphragms), reducing maintenance costs.
  • Long-lasting nitrogen: New sealing system and compound development has resulted in a 300% improvement in gas retention.
  • Protected tubes: Tubes are completely protected through the casing and are suitable for all types of excavation, epecially in narrow spaces.
  • Hydraulic system for blank firing: A regenerative oil circuit that avoids blank firing when the tool is not in contact with the rock.


The KFX breaker series, for excavators from 8-200t, has two adjusting valves as standard. First, a control valve on the cylinder of the hammer allows the operator to adjust the number of blows generated. A second valve allows the adjustment of the working pressure from 160 to 200 bar. Working in tunnels, and even underwater, is also possible by adding air tubes. The KFX breaker-series is available with a range of five different tools, suitable for penetrating a variety of surface structure.

  • Regulation of the operating pressure: For KFX-breakers (KFX 20 to KFX 200), regulating the working pressure from 160 bar to 200 bar can be managed manually by valve adjustment.
  • Blows adjustment: For KFX-breakers (KFX 20 to KFX 200), regulating the blow rate can be managed manually by adjusting a valve located on the side of the breaker.
  • Hydraulic system for blank firing: A regenerative oil circuit that avoids blank firing when the tool is not in contact with the rock.

 

ATTENTION: In order to be able to claim warranty, this report on installation and entry into service must be sent to the manufacturer within 30 days after entry into service, filled-in completely and correctly, by mail or email to This email address is being protected from spambots. You need JavaScript enabled to view it. 

KSB 1 for excavators from 0.5 to 2.5t / 1100 tp 5500 lbs operating weight.

KSB 2 for excavators from 1.2 to 3.5t / 2640 to 7700 lbs operating weight.

KSB 3 for excavators from 1.5 to 4.5t / 3300 to 9900 lbs operating weight.

KSB 4 for excavators from 2.5 to 6.5t / 5500 to 14300 lbs operating weight.

KSB 6 for excavators from 3 to 8t / 6600 to 17600 lbs operating weight.

KSB 8 for excavators from 4.5 to 9t / 9900 to 19800 lbs operating weight.

KSB 10 for excavators from 6 to 11t / 13200 to 24200 lbs operating weight.

KSB 12 for excavators from 8 to 12t / 17600 to 26400 lbs operating weight.


All packages consist of: breaker body, two standard tools at buyer's option (chisel, blunt, moil or pyramid) and Nitrogen adapter

KFX 16 for excavators from 10 to 16t / 22000 to 35200 lbs operating weight.

KFX 20 for excavators from 14 to 24t / 30800 to 52800 lbs operating weight.

KFX 26 for excavators from 20 to 30t / 44000 to 66000 lbs operating weight.

KFX 32 for excavators from 23 to 35t / 50600 to 77000 lbs operating weight.

KFX 36 for excavators from 28 to 45t / 61600 to 99000 lbs operating weight.

KFX 40 for excavators from 30 to 47t / 66000 to 103400 lbs operating weight.

KFX 47 for excavators from 35 to 50t / 77000 to 110000 lbs operating weight.

KFX 58 for excavators from 37 to 57t / 81571 to 125663lbs operating weight.

KFX 70 for excavators from 40 to 70t / 88185 to 154324lbs operating weight.

KFX 80 for excavators from 45 to  80t / 99208 to  176370lbs operating weight.

KFX 120 for excavators from 60 to 110t / 132277 to 242508lbs operating weight.

KFX 150 for excavators from 80 to 170t / 176370 to 374786lbs operating weight.

KFX 200 for excavators from 100 to 200t / 220462 to 4409lbs operating weight.


All packages consist of: breaker body, two standard tools at buyer's option (chisel, blunt, moil or pyramid) and Nitrogen adapter
 

Hydraulic Breaker KSB
Hydraulic Breaker KSB
Hydraulic Breaker KSB cutaway
Hydraulic Breaker KSB cutaway
Hydraulic Breaker KFX
Hydraulic Breaker KFX
Hydraulic Breaker KFX breakaway
Hydraulic Breaker KFX breakaway
Hydraulic Breaker KSB in action
Hydraulic Breaker KSB in action
Asphalt Drive
Asphalt Drive
Chisel Tool
Chisel Tool
Wood Cutter Tool
Wood Cutter Tool
Pyramide Tool
Pyramide Tool
Pile Drive
Pile Drive
Moll Point
Moll Point
Blunt Tool
Blunt Tool
Previous Next Play Pause

KSB Technical Data
KFX Technical Data
Hydraulic Breakers KSB and KFX Flyer
Hydraulic Breakers KSB and KFX Flyer (North America)
Report on Installation and Entry into Service for Hydraulic Breakers
Ask about this product
CONTACT

 

 

 


Give us a call:
UK: +44 (0) 161 406 7046
North America (Toll Free): 1 (800) 268 9525
General: +49 (0) 8021 8899 0
Office hours: from 08.00 until 17.00


Request a callback


You got some questions?
Please use our Contact form.


UK:  sales-uk@kinshofer.com 

North America:  sales-northamerica@kinshofer.com 

General:  info@kinshofer.com