Static Pulverisers


Designed for secondary demolition, the KINSHOFER static pulverisers are available in three different sizes and two versions each: standard or Extreme version. Both can break up reinforced concrete structures and separate steel.

All teeth and scrapers are exchangeable on site for both versions, as well as the ground tooth plate and the shrouds. The bearing points have been engineered for an optimum load handling and a reduced wear.

The standard version features an integrated dual action speed valve, while the Extreme-version is featuring the patented DemaPower cylinder, providing up to 20% more power and reducing the cycle times to under 5 seconds!

Static Pulverisers Standard Version:

DSP-30 for excavators with 20 to 35t / 44000 to 77000 lbs and cycle times of 2.5 seconds (open) and 2.5 seconds (close) at a closing force of 735 kN / 161700 lbf and a wide jaw opening for large parts of 885 mm / 34.84 in. 
DSP-45 for excavators with 30 to 50t / 66000 to 110000 lbs and cycle times of 2.6 seconds (open) and 2.9 seconds (close) at a closing force of 980 kN / 215600 lbf and a wide jaw opening for large parts of 1015 mm / 39.96 in. 
DSP-60 for excavators with 42 to 65t / 92400 to 143000 lbs and cycle times of 2.8 seconds (open) and 3.0 seconds (close) at a closing force of 1130 kN / 248600 lbf and a wide jaw opening for large parts of 1185 mm / 46.65 in.  


Static Pulverisers Extreme Version:

DSP-30Extreme for excavators with 20 to 35t / 44000 to 77000 lbs and cycle times of 2.0 seconds (open) and 2.3 seconds (close) at a closing force of 880 kN / 193600 lbf and a wide jaw opening for large parts of 885 mm / 34.84 in. 
DSP-45Extreme for excavators with 30 to 50t / 66000 to 110000 lbs and cycle times of 2.0 seconds (open) and 2.9 seconds (close) at a closing force of 1175 kN / 258500 lbf and a wide jaw opening for large parts of 1015 mm / 39.96 in. 
DSP-60Extreme for excavators with 42 to 65t / 92400 to 143000 lbs and cycle times of 2.0 seconds (open) and 2.8 seconds (close) at a closing force of 1370 kN / 301400 lbf and a wide jaw opening for large parts of 1185 mm / 46.65 in.

Demapower-Cylinder
Demapower-Cylinder
DSP-Action-(1)
DSP-Action-(1)
DSP-Action-(2)
DSP-Action-(2)
DSP-Action-(3)
DSP-Action-(3)
DSP-Action-(4)
DSP-Action-(4)
DSP-Action-(5)
DSP-Action-(5)
DSP-Action-(6)
DSP-Action-(6)
DSP-Action-(7)
DSP-Action-(7)
DSP-Action-(8)
DSP-Action-(8)
DSP-Action-(9)
DSP-Action-(9)
DSP
DSP
Previous Next Play Pause
Demapower-Cylinder DSP-Action-(1) DSP-Action-(2) DSP-Action-(3) DSP-Action-(4) DSP-Action-(5) DSP-Action-(6) DSP-Action-(7) DSP-Action-(8) DSP-Action-(9) DSP

DSP-30

DSP-45

DSP-60

Static Pulverisers DSP
Ask about this product