Sleeper Changers


New sleeper changing unit with ballast shield for Mono- und BiBloc sleepers

The new RBS20 sleeper changing unit with integrated ballast shield offers the additional option of bolt-on ballast buckets that can be used to extract the ballast from in between the sleepers and place it next to the track, for example. The plunge depth of the shield can be adjusted. The sleeper is grabbed with the mounted hydraulic gripper and can then be pulled out of the bed from the side. The grab is equipped with a 360° endless rotation. BiBloc sleepers can also be handled by opening the hydraulic gripper and thus clamping the sleeper. Ideal for road rail excavators with 12t to 24t operating weight. A special holding valve guarantees a secure retention of loads even in the case of pressure drops.

 

RBS20HPX

Another enhanced version is the RBS20HPX sleeper changing unit including the revolutionary HPXdrive. The ballast shield of the tool has the additional option of bolt-on buckets that can be used to not just push out the ballast from in between the sleepers, but actually shovel it out and place it at a designated place. The gripper unit of the attachment is equipped with the cylinderless, maintenance-free HPXdrive and is suitable for concrete as well as wooden sleepers without leaving any damage when clamping. An integrated 360° endless rotation provides additional flexibility as well as the adjustable plunge depth to adapt to the sleeper’s height.
Thanks to the HPXdrive system, the gripping tines can be easily exchanged with other HPX-shells.

RBS20 available for excavators with 10 to 24t / 22000 to 52800 lbs operating weight with a gripping range of 240 to 300 mm / 9.45 to 11.81 in, a total length of 2800 mm / 110.24 in and a load capacity of 2000 kg / 4400 lbs, including the sleeper changing unit, the ballast shield with bolt-on buckets and a 15t-rotator.


with HPXdrive:

RBS20HPX available for excavators with 12 up to 24t / 26400 up to 52800 lbs operating weight with a gripping range of 270 to 570 mm / 10.63 to 22.44 in, a total length of 2800 mm / 110.24 in and a load capacity of 2000 kg / 4400 lbs, including the sleeper changing unit, the ballast shield (optionally with bolt-on ballast buckets), 15t- rotator and HPXdrive with sleeper grapple, bolt-on adapter.

RBS-20-(1)
RBS-20-(1)
RBS-20-(2)
RBS-20-(2)
RBS-20-(3)
RBS-20-(3)
RBS20
RBS20
Previous Next Play Pause

RBS-20-Action-(1)
RBS-20-Action-(1)
RBS-20-Action-(2)
RBS-20-Action-(2)
RBS-20-Action-(3)
RBS-20-Action-(3)
RBS-20-Action-(4)
RBS-20-Action-(4)
RBS-20-Action-(5)
RBS-20-Action-(5)
RBS-20-Action-(6)
RBS-20-Action-(6)
RBS-20-Action-(7)
RBS-20-Action-(7)
RBS-20-Action-(8)
RBS-20-Action-(8)
RBS20 (7)
RBS20 (7)
RBS20 (1)
RBS20 (1)
RBS20 (2)
RBS20 (2)
RBS20 (3)
RBS20 (3)
RBS20 (4)
RBS20 (4)
RBS20 (5)
RBS20 (5)
RBS20 (6)
RBS20 (6)
Previous Next Play Pause

RBS20
RBS20HPX
Ask about this product