NOX Tiltrotators & Control Systems


The NOX-Tiltrotator by KINSHOFER is one of the most advanced tools for excavators.
A 360° continuous rotation and tilting angles of up to 2 x 55° make it a universal joint. This cylinderless solution features a very compact design with a narrow width and without any protruding parts. The flexible tool is extremely service friendly, as there are only two greasing points, there are less wear parts, the hydraulics are integrated into the solid cast housing, and the entire installation can easily be realized. The patented tilting function is provided by the elliptic piston design with only one thread. Due to the closed system, the risks of damages are reduced and the tilting force is constant.

A large variety of attachments is available and there is a good tolerance against back pressure thanks to the standard high flow swivel.

The suitable KINSHOFER smooth control provides more safety and precision. Operators can now control the actions of their NOX-Tiltrotator with two joysticks. Quick coupler and attached tools are also operated comfortably and effectively by means of the smart NOXPROP control system: tilt and rotation are controlled by proportional solenoid valves and can be run simultaneously. The extra function is controlled proportionally, too. A separate display module is included. The system has been engineered to facilitate the control of ten valves.

There is now even the choice to configure your control system with your laptop or your smartphone and the KINSHOFER-App.

TR06NOX for excavators with 3 to 6t / 6600 to 13200 lbs operating weight, featuring a tilting angle of 2 x 50° at a tilting torque of 8500 Nm / 6270 ft.lbs constant with 9.0 rotations per minute. Tiltrotator, control system, upper suspension or coupling and lower coupler or quick change are included in the standard package.

TR10NOX for excavators with 5 to 10t / 11000 to 22000 lbs operating weight, featuring a tilting angle of 2 x 55° at a tilting torque of 10500 Nm / 7745 ft.lbs constant with 7.5 rotations per minute. Tiltrotator, control system, upper suspension or coupling and lower coupler or quick change are included in the standard package.

TR14NOX for excavators with 10 to 14t / 22000 to 30900 lbs operating weight, featuring a tilting angle of 2 x 50° at a tilting torque of 26000 Nm / 19175 ft.lbs constant with 8.5 rotations per minute. Tiltrotator, control system, upper suspension or coupling and lower coupler or quick change are included in the standard package.

TR19NOX for excavators with 9 to 19t / 19800 to 39600 lbs operating weight, featuring a tilting angle of 2 x 50° at a tilting torque of 22500 Nm / 16595 ft.lbs constant with 7.0 rotations per minute. Tiltrotator, control system, upper suspension or coupling and lower coupler or quick change are included in the standard package.

TR25NOX for excavators with 18 to 25t / 39600 to 55000 lbs operating weight, featuring a tilting angle of 2 x 50° at a tilting torque of 44000 Nm / 32450 ft.lbs constant with 7.0 rotations per minute. Tiltrotator, control system, upper suspension or coupling and lower coupler or quick change are included in the standard package.

CSP NOXPROP: tilt, rotation and extra function proportional; choice of tool or profile via display; configuration via laptop or smartphone.

DF10: all functions are controlled by the excavator directly; max. 5 double acting circles can be connected; 2 extra functions plus quick hitch (6-port swivel).

DF8: all functions are controlled by the excavator directly; max. 4 double acting circles can be connected; 1 extra function plus quick hitch (4-port swivel).

DF4: two double acting circles required; circle 1 controls rotation, circle 2 controls tilt, extra function plus quick coupler. The switch between the functions is controlled by an integrated solenoid valve. A free ON/OFF-button is required on the joystick. The quick coupler is controlled by a security switch on the instrument board (mainly for TR25NOX).

CSP SVAB: tilt and rotation proportional; extra function ON/OFF; limited choice of profiles via display; configuration only by controller.

Steuerung-frei
Steuerung-frei
TR06NOX KSW03 Sandwich
TR06NOX KSW03 Sandwich
TR14NOX
TR14NOX
TR19NOX Schnitt
TR19NOX Schnitt
TR19NOX
TR19NOX
TR06-detail-worm-drive-(11)-sw
TR06-detail-worm-drive-(11)-sw
TR06NOX-160412_4-rgb
TR06NOX-160412_4-rgb
TR10-mit-Gripper
TR10-mit-Gripper
TR10NOX-(1)
TR10NOX-(1)
TR10NOX-2
TR10NOX-2
TR10NOX-mit-Schnellwechsler-von-unten_seite
TR10NOX-mit-Schnellwechsler-von-unten_seite
TR10NOX-mit-Schnellwechsler-von-unten
TR10NOX-mit-Schnellwechsler-von-unten
TR10NOX
TR10NOX
TR18NOX-2
TR18NOX-2
TR25NOX-ohne-Anbaugeraete-(1)
TR25NOX-ohne-Anbaugeraete-(1)
TR25NOX-ohne-Anbaugeraete-(2)
TR25NOX-ohne-Anbaugeraete-(2)
TR25NOX-ohne-Anbaugeraete
TR25NOX-ohne-Anbaugeraete
Previous Next Play Pause
Steuerung-frei TR06NOX KSW03 Sandwich TR14NOX TR19NOX Schnitt TR19NOX TR06-detail-worm-drive-(11)-sw TR06NOX-160412_4-rgb TR10-mit-Gripper TR10NOX-(1) TR10NOX-2 TR10NOX-mit-Schnellwechsler-von-unten_seite TR10NOX-mit-Schnellwechsler-von-unten TR10NOX TR18NOX-2 TR25NOX-ohne-Anbaugeraete-(1) TR25NOX-ohne-Anbaugeraete-(2) TR25NOX-ohne-Anbaugeraete

Steuerung-und-NOX-in-Action-aus-Baggerfahrersicht
Steuerung-und-NOX-in-Action-aus-Baggerfahrersicht
TR10NOX-mit-ATR-Greifer
TR10NOX-mit-ATR-Greifer
TR10NOX-mit-GAF
TR10NOX-mit-GAF
TR10NOX-mit-Gripper
TR10NOX-mit-Gripper
TR10NOX-mit-SKD
TR10NOX-mit-SKD
TR10NOX-mit-Sortierloeffel
TR10NOX-mit-Sortierloeffel
TR25NOX-120314-(140)-
TR25NOX-120314-(140)-
TR25NOX-mit-Loeffel-(1)
TR25NOX-mit-Loeffel-(1)
TR25NOX-mit-Loeffel-(2)
TR25NOX-mit-Loeffel-(2)
TR25NOX-mit-Loeffel-(3)
TR25NOX-mit-Loeffel-(3)
TR25NOX-mit-Loeffel
TR25NOX-mit-Loeffel
TR19NOX-Action (7)
TR19NOX-Action (7)
TR14NOX-Action (1)
TR14NOX-Action (1)
TR14NOX-Action (2)
TR14NOX-Action (2)
TR14NOX-Action (3)
TR14NOX-Action (3)
TR19NOX-Action (1)
TR19NOX-Action (1)
TR19NOX-Action (2)
TR19NOX-Action (2)
TR19NOX-Action (3)
TR19NOX-Action (3)
TR19NOX-Action (4)
TR19NOX-Action (4)
TR19NOX-Action (5)
TR19NOX-Action (5)
TR19NOX-Action (6)
TR19NOX-Action (6)
Previous Next Play Pause
Steuerung-und-NOX-in-Action-aus-Baggerfahrersicht TR10NOX-mit-ATR-Greifer TR10NOX-mit-GAF TR10NOX-mit-Gripper TR10NOX-mit-SKD TR10NOX-mit-Sortierloeffel TR25NOX-120314-(140)- TR25NOX-mit-Loeffel-(1) TR25NOX-mit-Loeffel-(2) TR25NOX-mit-Loeffel-(3) TR25NOX-mit-Loeffel TR19NOX-Action (7) TR14NOX-Action (1) TR14NOX-Action (2) TR14NOX-Action (3) TR19NOX-Action (1) TR19NOX-Action (2) TR19NOX-Action (3) TR19NOX-Action (4) TR19NOX-Action (5) TR19NOX-Action (6)

Direct Comparison Between the Work With and Without the NOX-Tiltrotator

NOX-Tiltrotator Info-Trailer

TR06NOX
TR10NOX
TR14NOX
TR19NOX
TR25NOX
NOX Attachments
NOX Control Systems
NOX Flyer
TR06NOX Jobreport
TR10NOX Jobreport
Ask about this product