TR14NOX Tiltrotators & Control Systems


The NOX-Tiltrotator by KINSHOFER is one of the most advanced tools for excavators with 10t / 22000 lbs up to 14t / 30800 lbs operating weight. A 360° endless rotation and tilting angles of up to 2 x 50° make it a universal joint. This cylinderless solution features a very compact design with a narrow width and without any protruding parts. The flexible tool only requires a low maintenance as there are only two greasing points, there are less wear parts, the hydraulics are integrated into the solid cast housing, and the entire installation can easily be realized. The worm drive runs in a permanent oil bath. The patented tilting function is provided by the elliptic piston design with only one thread. Due to the closed system, the risks of damages are reduced and the tilting force is constant. Attachments that require a high oil flow are also no problem for the NOX-Tiltrotator.
Optional: electrical swivel for the use of 2D/3D excavating systems and extra safety requiring couplers.


The suitable KINSHOFER smooth control provides more safety and precision. Operators can now control the actions of their NOX-Tiltrotator with two joysticks. Quick coupler and attached tools are also operated comfortably and effectively by means of the smart NOXPROP control system: tilt and rotation are controlled by proportional solenoid valves and can be run simultaneously. The extra function is controlled proportionally, too. A separate display module is included. The system has been engineered to facilitate the control of ten valves.

There is now even the choice to configure your control system with your laptop or your smartphone and the KINSHOFER-App. 

TR14NOX for excavators with 10 to 14t / 22000 to 30800 lbs operating weight, featuring a tilting angle of 2 x 50° at a tilting torque of 26000 Nm / 19175 ft.lbs constant with 8.5 rotations per minute. Tiltrotator, control system, upper suspension or coupling and lower coupler or quick change are included in the standard package.

CSP NOXPROP: tilt, rotation and extra function proportional; choice of tool or profile via display; configuration via laptop or smartphone.

DF10: all functions are controlled by the excavator directly; max. 5 double acting circles can be connected; 2 extra functions plus quick hitch (6-port swivel).

DF4: two double acting circles required; circle 1 controls rotation, circle 2 controls tilt, extra function plus quick coupler. The switch between the functions is controlled by an integrated solenoid valve. A free ON/OFF-button is required on the joystick. The quick coupler is controlled by a security switch on the instrument board.

CSP SVAB: tilt and rotation proportional; extra function ON/OFF; limited choice of profiles via display; configuration only by controller.

TR14NOX
TR14NOX
TR14NOX-Action (2)
TR14NOX-Action (2)
TR14NOX-Action (3)
TR14NOX-Action (3)
TR14NOX-Action (1)
TR14NOX-Action (1)
Previous Next Play Pause

Direct comparison between the working with and without the NOX-Tiltrotator

TR10NOX Tiltrotator with Bucket

NOX-Tiltrotator Info-Trailer

TR14NOX
NOX Attachments
NOX Control System
Tiltrotators-Flyer
TR10NOX Jobreport
Ask about this product