WS-Cutters

 

NEW DRUM CUTTER SERIES!

The cutters with robust spur gearing are driven by high torque motors. In addition, they are equipped with a gear reduction to increase the cutting force. The optimal selection of drum and chisel guarantees high performance for loosening of material and reduces wear.
The best suited components for your task will provide optimum penetration into the rock at low vibration and noise levels.
Underwater operation in up to 25m water depth is no problem thanks to the heavy duty sealing system!

Some facts on the Drum Cutters:

  • Low noise level and less vibration reduce work fatigue
  • Maximum performance due to robust spur gear
  • Waterproof to 25m depth
  • Extremely robust with low maintenance due to massive drive shaft bearing and heavy duty sealing system
  • Hydraulic motor can be adjusted to the output of the excavator hydraulics
  • Fast and easy exchange of wear parts reduces downtimes
  • Large drum and chisel assortment
  • Optional 360° Rotation: rotation of the cutter allows exact positioning in corners, on walls and other vertical surfaces for more accurate contouring


Here you can find and download the flyer with every important fact about our new series!

Also great in combination with our NOX Tiltrotators!

You would like to have some more information? Just contact our product manager for cutters:

Oliver Boldt

Tel.: 0171 335 33 29

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

 

New Drum Cutters:

WS15N available for excavators with 2t to 8t / 4400 lbs to 17300 lbs, with 18/22 kW nominal power (max.) and 30 - 65 l/min / 7.93 - 17.17 GPM oil flow at a self-weight of 250 kg / 550 lbs.

WS30N available for excavators with 8t to 15t / 17300 lbs to 33000 lbs, with 30 kW nominal power (max.) and 70 - 120 l/min / 18.49 - 31.70 GPM oil flow at a self-weight of 420 kg / 924 lbs.

WS45N available for excavators with 12t to 20t / 26400 lbs to 44000 lbs, with 45 kW nominal power (max.) and 100 - 190 l/min / 26.42 - 50.20 GPM oil flow at a self-weight of 850 kg / 1870 lbs.

WS60N available for excavators with 18t to 30t / 39600 lbs to 66000 lbs, with 60 kW nominal power (max.) and 120 - 210 l/min / 31.70 - 55.48 GPM oil flow at a self-weight of 1400 kg / 3080 lbs.

WS90N available for excavators with 25t to 35t / 55000 lbs to 77000 lbs, with 90 kW nominal power (max.) and 240 - 340 l/min / 63.41 - 89.83 GPM oil flow at a self-weight of 1460 kg / 3212 lbs.

WS120N available for excavators with 30t to 45t / 66000 lbs to 99000 lbs, with 120 kW nominal power (max.) and 250 - 500 l/min / 66.05 - 132.10 GPM oil flow at a self-weight of 2550 kg / 5610 lbs.

WS150N available for excavators with 40t to 60t / 88000 lbs to 132000 lbs, with 140 kW nominal power (max.) and 360 - 550 l/min / 95.11 - 145.31 GPM oil flow at a self-weight of 2800 kg / 6160 lbs.

WS-Cutter with NOX
WS-Cutter with NOX
WS Drum Cutter underwater
WS Drum Cutter underwater
WS Drum Cutter in tunnel
WS Drum Cutter in tunnel
WS-Cutter in action
WS-Cutter in action
WS Drum cutter
WS Drum cutter
WS Cutter
WS Cutter
WS Transversal Cutter
WS Transversal Cutter
WS Drum Cutter
WS Drum Cutter
Previous Next Play Pause
WS-Cutter with NOX WS Drum Cutter underwater WS Drum Cutter in tunnel WS-Cutter in action WS Drum cutter WS Cutter WS Transversal Cutter WS Drum Cutter

Flyer New WS-Series Drum Cutters
Ask about this product