TR06NOX Tiltrotators & Control Systems


The NOX-Tiltrotator by KINSHOFER is one of the most advanced tools for excavators with 3t / 6600 lbs up to 6t / 13200 lbs operating weight. A 360° endless rotation and tilting angles of up to 2 x 50° make it a universal joint. This cylinderless solution features a very compact design with a narrow width and without any protruding parts. The flexible tool only requires a low maintenance as there are only two greasing points, there are less wear parts, the hydraulics are integrated into the solid cast housing, and the entire installation can easily be realized. The patented tilting function is provided by the elliptic piston design with only one thread. Due to the closed system, the risks of damages are reduced and the tilting force is constant. A large variety of attachments is available and there is a good tolerance against back pressure thanks to the standard high flow swivel.
The suitable KINSHOFER smooth control provides more safety and precision. Operators can now control the actions of their NOX-Tiltrotator with two joysticks. Quick coupler and attached tools are also operated comfortably and effectively by means of the smart NOXPROP control system: tilt and rotation are controlled by proportional solenoid valves and can be run simultaneously. The extra function is controlled proportionally, too. A separate display module is included. The system has been engineered to facilitate the control of ten valves.
There is now even the choice to configure your control system with your laptop or your smartphone and the KINSHOFER-App. 

TR06NOX for excavators with 3 to 6t / 6600 to 13200 lbs operating weight, featuring a tilting angle of 2 x 50° at a tilting torque of 8500 Nm / 6270 ft.lbs constant with 9.0 rotations per minute. Tiltrotator, control system, upper suspension or coupling and lower coupler or quick change are included in the standard package.

CSP NOXPROP: tilt, rotation and extra function proportional; choice of tool or profile via display; configuration via laptop or smartphone.

DF10: all functions are controlled by the excavator directly; max. 5 double acting circles can be connected; 2 extra functions plus quick hitch (6-port swivel).

DF4: two double acting circles required; circle 1 controls rotation, circle 2 controls tilt, extra function plus quick coupler. The switch between the functions is controlled by an integrated solenoid valve. A free ON/OFF-button is required on the joystick. The quick coupler is controlled by a security switch on the instrument board.

CSP SVAB: tilt and rotation proportional; extra function ON/OFF; limited choice of profiles via display; configuration only by controller.

Control-from-Excavator
Control-from-Excavator
Control
Control
NOX-Gripper
NOX-Gripper
TR06NOX-Action-(1)
TR06NOX-Action-(1)
TR06NOX-Action-(2)
TR06NOX-Action-(2)
TR06NOX-Action-(3)
TR06NOX-Action-(3)
TR06NOX-Action-(4)
TR06NOX-Action-(4)
TR06NOX-Action-(6)
TR06NOX-Action-(6)
TR06NOX-Action-(7)
TR06NOX-Action-(7)
TR06NOX-Action-(8)
TR06NOX-Action-(8)
TR06NOX-Action-(9)
TR06NOX-Action-(9)
TR06NOX-Action-(10)
TR06NOX-Action-(10)
TR06NOX-BucketSet
TR06NOX-BucketSet
TR06NOX-Special
TR06NOX-Special
TR06NOX-Worm-Drive
TR06NOX-Worm-Drive
Previous Next Play Pause
Control-from-Excavator Control NOX-Gripper TR06NOX-Action-(1) TR06NOX-Action-(2) TR06NOX-Action-(3) TR06NOX-Action-(4) TR06NOX-Action-(6) TR06NOX-Action-(7) TR06NOX-Action-(8) TR06NOX-Action-(9) TR06NOX-Action-(10) TR06NOX-BucketSet TR06NOX-Special TR06NOX-Worm-Drive

Direct Comparison Between the Work
With and Without the NOX-Tiltrotator

 

NOX-Tiltrotator
Info-Trailer

 
TR06NOX
NOX Attachments
NOX Control System
Tiltrotators-Flyer
TR06NOX Jobreport
Ask about this product